Polyamide (Nylon) Rope

General:

  • This product is by 100% high tensity nylon fiber, and through two twisting, then processing woven. The strength of this rope is higher than that of ordinary cable with good elongation and good impact resistance, abrasion resistance, UV resistance and chemical corrosion. But under the wet condition, the strength and elongation are different with intensity fell by 10%.
  • Widely used in ship assembly, ocean transportation, shipbuilding industry, port operation and so on.

Technology comparison:

  • Melting point: 265 ℃
  • Specific gravity: 1.38g/cm³( Not Float)
  • Structure: 8, 12 strand
  • Elongation at break: 25-30%
  • Water absorption: 0-2%
  • Coil length: 220 m
  • Spliced strength: ± 10% lower
  • Weight and length tolerance: ± 5%
  • MBL = Minimum Breaking Load conform ISO 2307
  • Other sizes available upon request

Parameter table — 8 strand rope 

Specification
Dia
Specification
Cir.
Weight
KGS/100M
Weight
LBS/100FT
Breaking strength
Ton
Breaking strength
KN
24 3 35.5 23.9 13.4 131.4
28 3-1/2 48.5 32.6 17.8 174.6
32 4 63.0 42.4 22.5 220.7
36 4-1/2 80.0 53.8 28.2 276.6
40 5 100.0 67.2 34.0 333.5
44 5-1/2 121.0 81.4 40.5 397.3
48 6 143.0 96.1 47.5 466.0
52 6-1/2 168.0 112.9 55.0 539.5
56 7 193.0 129.7 62.5 613.1
60 7-1/2 221.0 148.5 70.5 691.6
64 8 252.0 169.4 80.0 784.8
68 8-1/2 286.0 192.2 90.0 882.9
72 9 319.0 214.4 100.0 981.0
80 10 394.0 264.8 123.0 1206.6
88 11 478.0 321.2 145.0 1422.5
90 11-1/4 499.0 335.3 151.0 1481.3
96 12 569.0 382.4 170.0 1667.7
100 12-1/2 616.0 414.0 184.0 1805.0
104 13 666.0 447.5 200.0 1961.9
112 14 772.0 518.8 210.0 2060.0
120 15 887.0 596.1 255.0 2501.5

Parameter table — 12 strand rope

Specification
Dia
Specification
Cir.
Weight
KGS/100M
Weight
LBS/100FT
Breaking strength
Ton
Breaking strength
KN
24 3 35.5 23.9 13.4 131.4
28 3-1/2 48.5 32.6 17.8 174.6
32 4 63.0 42.4 22.5 220.7
36 4-1/2 83.0 53.8 29.8 292.3
40 5 100.0 67.2 35.0 343.3
44 5-1/2 121.0 81.4 42.3 414.9
45 5-5/8 124.8 83.9 44.1 432.6
48 6 143.0 96.1 49.5 485.6
50 6-1/4 153.5 103.2 54.1 530.7
52 6-1/2 168.0 112.9 58.7 575.8
55 6-7/8 186.2 125.2 66.9 656.0
56 7 201.0 129.7 69.6 682.8
60 7-1/2 226.0 148.5 77.9 764.2
64 8 252.0 169.4 86.6 849.5
65 8-1/8 260.0 174.7 89.5 877.5
68 2-11/16 286.0 192.2 98.0 961.3
70 8-3/4 302.0 203.0 105.0 1030.0
72 9 330.0 214.4 112.0 1098.7
75 9-3/8 346.0 232.5 119.9 1176.0
80 10 403.0 264.8 133.0 1304.7
85 10-5/8 445.0 299.0 148.0 1451.9
88 11 478.0 321.2 157.0 1540.1
90 11-1/4 499.0 335.3 165.5 1623.6
95 11-7/8 556.0 373.6 186.8 1832.0
96 12 569.0 382.4 191.0 1873.7
100 12-1/2 616.0 414.0 200.5 1966.9
104 13 666.0 447.5 210.5 2060.0
112 14 772.0 518.8 228.0 2236.6
120 15 887.0 596.1 270.0 2648.6

 

 

Inquiry Now